At+Clir Calling Line Identification Restriction - Siemens MC55 Command Set

MC55 AT Command Set
9.10 AT+CLIR
9.10

AT+CLIR Calling line identification restriction

Syntax
Test Command
AT+CLIR=?
Response(s)
+CLIR: (list of supported
OK
Read Command
AT+CLIR?
Response(s)
,
+CLIR<n> <m>
OK
ERROR
+CME ERROR: <err>
Write Command
AT+CLIR= [ ]
<n>
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN ASC0 ASC1 MUX1
% % %
Reference(s)
GSM 07.07
Command Description
This command refers to the GSM supplementary service CLIR (Calling Line Identification Restriction).
Parameter Description
(num)
<n>
Parameter shows the settings for outgoing calls:
(P)
[0]
1
2
MC55_ATC_V01.05
Confidential / Released
s)
<n>
MUX2 MUX3
% % %
Presentation indicator is used according to the subscription of the CLIR service
CLIR invocation
CLIR suppression
Page 235 of 469
s
m
obile
2/10/04