At^snfd Set Audio Parameters To Manufacturer Default Values - Siemens MC55 Command Set

MC55 AT Command Set
16.10 AT^SNFD
16.10

AT^SNFD Set audio parameters to manufacturer default values

Syntax
Test Command
AT^SNFD=?
Response(s)
OK
Exec Command
AT^SNFD
Response(s)
OK
PIN ASC0 ASC1 MUX1
! % %
Reference(s)
SIEMENS
Command Description
TA sets the active audio parameters to manufacturer defined default values.
Notes
• The restored values are:
:
AT^SNFI <inBbcGain>
:
AT^SNFO <outBbcGain>
: ,
AT^SAIC <io> <mic>
:
AT^SNFS <audMode>
• Remember that the factory set audio mode 1 is fixed to
together with
<audMode>
audio modes 2 - 6. This means, if
always return
<outStep>
MC55_ATC_V01.05
Confidential / Released
MUX2 MUX3
% % %
, (or the equivalent
<inCalibrate>
,
<outCalibrate>
,
<ep>
=4, but does not affect the values of
<outStep>
=1, the read commands
<audMode>
=4. In all other modes the
Page 405 of 469
AT^SNFA
[0 to 4],
<sideTone>
=4. Consequently,
<outStep>
AT^SNFO
value is retained until explicitly changed.
<outStep>
s
m
parameters)
AT^SNFD
currently selected in
<outStep>
, and
AT^SNFV AT+CLVL
obile
restores
will
2/10/04