Table of Contents
Advertisement
MC55 AT Command Set
2.3 AT&W
2.3
AT&W Stores current configuration to user defined profile
Syntax
Exec Command
AT&W [
]
<value>
Response(s)
OK
ERROR/+CME ERROR <err>
PIN
ASC0
ASC1
MUX1
!
%
%
Reference(s)
V.25ter
Command Description
TA stores the currently set parameters to a user defined profile in the non-volatile memory.
Parameter Description
(num)
<value>
[0]
Notes
•
The user defined profile will be restored automatically after PowerUp. Use
to restore factory settings. Until the first use of
AT&F
•
User defined profiles in multiplex mode:
stores the current setting of each channel to the user profile, no matter on which of the three channels
AT&W
the command is executed. Each channel may have an individual profile.
•
A list of parameters stored to the user profile can be found in Chapter
.
with AT&W
MC55_ATC_V01.05
Confidential / Released
MUX2
MUX3
%
%
%
Number of profile
Page 33 of 469
ATZ
,
works as
AT&W
ATZ
AT&F
AT Command Settings storable
s
m
obile
to restore user profile and
.
2/10/04
Advertisement
Table of Contents
