At+Fbor Query Data Bit Order - Siemens MC55 Command Set

MC55 AT Command Set
11.4 AT+FBOR
11.4

AT+FBOR Query data bit order

Syntax
Test Command
AT+FBOR=?
Response(s)
(list of supported
<bor>
OK
Read Command
AT+FBOR?
Response(s)
<bor>
OK
Write Command
AT+FBOR=<bor>
Response(s)
OK
PIN ASC0 ASC1 MUX1
! % !
Reference(s)
EIA PN-2388
Command Description
Query the bit order for receive-mode. The mode is set by the ME depending on the selected Service Class, see
" Fax: Select, read or test service class".
AT+FCLASS
Parameter Description
(num)
<bor>
bit order modes
0
[1]
Note
• Used for Fax Class 2 only
MC55_ATC_V01.05
Confidential / Released
s)
MUX2 MUX3
% ! !
Direct bit order for both Phase C and for Phase B/D data.
Reversed bit order for Phase C data, direct Bit Order for Phase B/D data.
Page 286 of 469
s
m
obile
2/10/04