At^ssda Set Sms Display Availability - Siemens MC55 Command Set

MC55 AT Command Set
12.23 AT^SSDA
12.23

AT^SSDA Set SMS Display Availability

This command allows to notify the MC55 of its controlling application's capability to immediately display incoming
SMS on a display.
If the application is able to display incoming SMS, class 0 SMS shall be displayed immediately. However, if it
does not, class 0 SMS shall be treated as if no message class is determined (GSM 03.38[14]).
The effect of this command if
If =1 and =1 incoming class 0 SMS need to be acknowledged with
<da> <mt>
)
AT+CSMS
If multiplex mode is enabled (
nels have to use =0.
<mt>
Syntax
Test Command
AT^SSDA=?
Response(s)
^SSDA: list of supported
OK
Read Command
AT^SSDA?
Response(s)
^SSDA:<da>
OK
Write Command
AT^SSDA=<da>
Response(s)
OK
PIN ASC0 ASC1 MUX1
! % %
Reference(s)
SIEMENS
Command Description
The read command returns ME's current capability setting.
MC55_ATC_V01.05
Confidential / Released
=1 is to determine the behavior of parameter
<da>
) and =1 with
AT+CMUX <da>
s
<da>
MUX2 MUX3
% % %
Page 353 of 469
<mt>
AT+CNMA
=1 is set on any logical channel, all other chan-
<mt>
s
m
obile
of :
AT+CNMI
(see also and
AT+CNMI
2/10/04