At+Cgdcont Define Pdp Context - Siemens MC55 Command Set

MC55 AT Command Set
10.6 AT+CGDCONT
10.6

AT+CGDCONT Define PDP Context

Syntax
Test Command
AT+CGDCONT=?
Response(s)
+CGDCONT: (range of supported
s)
<h_comp>
OK
ERROR
+CME ERROR
Read Command
AT+CGDCONT?
Response(s)
,
+CGDCONT: <cid> <PDP_type>
...
OK
ERROR
+CME ERROR
Write Command
AT+CGDCONT= [ [,
<cid>
Response(s)
OK
ERROR
+CME ERROR
PIN ASC0 ASC1 MUX1
% % %
Reference(s)
GSM 07.07
Command Description
The test command returns supported values as a compound value.
The read command returns the current settings for each defined PDP context.
The write command specifies the parameters for a PDP context identified by the context identifier
number of contexts that may be in a defined state at the same time is given by the range returned by the test
command. A special form of the write command (
become undefined.
MC55_ATC_V01.05
Confidential / Released
s),
<cid> <PDP_type>
, ,
<APN> <PDP_addr>
[, [,
<PDP_type> <APN> <PDP_addr>
MUX2 MUX3
% % %
AT+CGDCONT
Page 253 of 469
, , , (list of supported
<d_comp>
, ,
<d_comp> <h_comp>
]]]]
= ) causes the values for context
<cid>
s
m
obile
s), (list of supported
. The
<cid>
to
<cid>
2/10/04