Atx Set Connect Result Code Format And Call Monitoring - Siemens MC55 Command Set

MC55 AT Command Set
2.6 ATX
2.6

ATX Set CONNECT result code format and call monitoring

Syntax
Exec Command
ATX [ ]
<value>
Response(s)
OK
PIN ASC0 ASC1 MUX1
! % %
Reference(s)
V.25ter
Command Description
This parameter setting determines whether or not the TA detects the presence of dial tone and busy signal and
whether or not TA transmits particular result codes.
Parameter Description
(num)(&W)(&V)
<value>
[0]
1
2
3
(&F)
4
MC55_ATC_V01.05
Confidential / Released
MUX2 MUX3
% % %
CONNECT result code only returned, dial tone and busy detection are both dis-
abled.
CONNECT
<text>
both disabled.
CONNECT
<text>
detection is disabled.
CONNECT
<text>
detection is enabled.
CONNECT
<text>
enabled.
Page 37 of 469
result code only returned, dial tone and busy detection are
result code returned, dial tone detection is enabled, busy
result code returned, dial tone detection is disabled, busy
result code returned, dial tone and busy detection are both
s
m
obile
2/10/04