At+Cmgs Send Sms Message - Siemens MC55 Command Set

MC55 AT Command Set
12.7 AT+CMGS
12.7

AT+CMGS Send SMS message

Syntax
Test Command
AT+CMGS=?
Response(s)
OK
Write Command
If text mode (see
AT+CMGF
[,
AT+CMGS=<da> <toda>
Response(s)
[,
+CMGS: <mr> <scts>
OK
If sending fails see notes below.
Write Command
If PDU mode (see
AT+CMGF
AT+CMGS=<length>
<CR>
Response(s)
[,
+CMGS: <mr> <ackpdu>
OK
If sending fails see notes below.
PIN ASC0 ASC1 MUX1
% % %
Reference(s)
GSM 07.05
Command Description
The write command transmits a short message from TE to network (SMS-SUBMIT).
After invoking the write command wait for the prompt ">" and then start to write the message. To send the mes-
sage simply enter
<CTRL-Z>
To abort sending use
<ESC>
The message reference
identify the message in a delivery status report provided as an unsolicited result code.
Notes
• If sending fails, for example, if a message is too long, the result code depends on the current setting of the
command:
AT^SM20
MC55_ATC_V01.05
Confidential / Released
=1)
] Text can be entered.
<CR>
]
=0)
PDU can be entered.
]
MUX2 MUX3
% % %
. After the prompt a timer will be started to observe the input.
. Abortion is acknowledged with "OK", though the message will not be sent.
is returned to the TE on successful message delivery. The value can be used to
<mr>
Page 323 of 469
/
<CTRL-Z> <ESC>
/
<CTRL-Z> <ESC>
s
m
obile
2/10/04