Performing Camera Tours; Recording, Searching, And Playing Images; Recording Live Images - Sony IPELA NSR-500 Series User Manual

Performing Camera Tours

You can perform "tours," in which the camera moves
successively to preset pan, tilt, and zoom positions. The
camera only stops at each preset position for the duration
set in advance.
Using the shadow tour function, you can also perform
tours of camera motions recorded manually.
Note
To use the camera tour or shadow tour functions, a camera
tour or shadow tour must be configured beforehand. For
details on configuring a tour, see "Configuring Camera
Tours" (page 46) or "Configuring Shadow Tours"
(page 47).
1
Select any monitor frame, and display the images of
the camera you want to control.
2
Select a camera tour in [Tour] on the Camera Control
pane, and click
Tours labeled P-1, P-2, etc. are camera tours and S-1
to S-4 are shadow tours.
The camera tour is performed.
106

Recording, Searching, and Playing Images

(Start Camera Tour).
Recording, Searching,
and Playing Images
You can record live images, and search and play back
recorded image data and audio data.
This section describes the following operations.
• "Recording Live Images" (page 106)
You can record the images currently being captured by a
camera.
• "Playing Recorded Images" (page 107)
Simple operations are available for playing recorded
images, including quick playback for automatically
rewinding a specified amount of time and playing,
specifying a date and time and playing, and playing from
alarm history.
• "Searching Recorded Images" (page 108)
You specify a date and time or type of recording to
search for recorded images.
• "Playing Recorded Images from Search Results"
(page 108)
You can play recorded images from Search Results.
Note
If high processing loads or network delays occur during
recording, some inconsistency may occur in the frame rate
of the recorded images. When such images are played
back, the image may appear to freeze or play quickly at
some instants. However, these occurrences do not indicate
dropped frames.

Recording Live Images

You can record the images currently being captured by a
camera.
1
Select the monitor frame for which you want to record
live images.
Note
If no live images are displayed, click [LIVE] on the
Monitor Control pane.