Configuring System Alert Settings - Sony IPELA NSR-500 Series User Manual

Configuring System Alert
Settings
A system alert (alarm) can be generated when camera
video loss or insufficient disk space is detected. Configure
the settings for the action to perform after a system alert is
generated.
1
Click [Server] at the top of the Configuration window.
The Server Configuration screen appears.
2
Select the server for which you want to set the system
alert settings from the [Server] tree on the left of the
screen.
3
Configure the information to notify of in the system
alert on the [System Alert] tab, and click [Apply].
For details on each of the items, refer to "Setting Items
of the [System Alert] Tab" (page 90).
1 Select the check boxes for the notification items,
and configure each item.
2 Click [Apply].
The settings are saved.
4
Configure the action to perform after a system alert
occurs.
90

Configuring System Alert Settings

1
2
For details on actions, refer to "Configuring Action
Settings" (page 82).
Setting Items of the [System Alert] Tab
This tab is displayed by clicking [Server] in the
[Configuration] window, and clicking the [System Alert]
tab.
After configuring each item, click [Apply].
A VIDEO LOSS
Select the check box to notify of the image signal
becoming disconnected.
Note
Disconnection of the audio signal is not a target for
detection.
Camera List
This displays a list of the video loss notification settings.
Target
Select the check boxes for the cameras to be target for
notification.
Camera Name
This displays a list of the names of the cameras
registered to NSR.
B Disk Usage
Select the check box to notify of insufficient remaining
disk space.
Target Storage List
Select the check boxes for the storage to be target for
notification.
Target
Select the check boxes for the storage to be target for
notification.
Name
This displays the storage name of the target for
notification.
A
B
C
D E F