Configuring Action
Settings
In NSR, you can configure the action for when, for
example, a sensor input, VMD (camera) or system alarm is
detected, or for when a manual action is performed.
Relationship Between Events and Actions
When an event such as an
alarm occurs...
Camera sensor input
VMD (Camera)
Hardware error
System alart
Manual trigger
etc.
Events
There are the following way of configuring actions.
• Manual Actions (page 82)
Configure an action for when a trigger occurs manually.
• Event/Alarm Actions (page 85)
Configure an action for when an alarm or event occurs
during a specified schedule period.
Manual Action
Configure an action for when a trigger occurs manually.
Registering a Manual Action
1
Click [Manual Action] at the top of the Configuration
window.
The Manual Action screen appears.
82
Configuring Action Settings
The action corresponding
to the event is performed.
Camera alarm output
Sending e-mail
Switching layput
Beep sound
etc.
Actions
2
Click
(Add).
3
Configure the following items, and register the action.
1 2
For details on each of the items, refer to "Setting Items
of Manual Action Screen" (page 83).
1 Enter a name for the action.
2 Configure each item.
3 Click [Apply].
The action is registered.
3