Deleting Devices; Settings Required When Using Snc-Cs20/Cm120/Ds10/Dm110/ Ds60/Dm160 - Sony IPELA NSR-500 Series User Manual

• If a common value cannot be set for multiple cameras,
that setting item is unavailable. Change the combination
of cameras to select, and then configure the setting.
1
Select the camera(s) you want to change the
registration details of on the Device Configuration
screen.
You can also select multiple cameras at once by
holding down the Shift key or Ctrl key while selecting.
The camera registration details appear.
2
Click the [General] tab, and modify the settings of the
items you want to change.
For details on each of the items, refer to "Setting Items
of the [General] Tab" (page 38).
For details on Generic Camera, refer "Settings
Required when Using SNC-CS20/CM120/DS10/
DM110/DS60/DM160" (page 35).
3
After configuring each item, click [Apply].
The settings are changed.

Deleting Devices

1
Select the camera you want to delete on the Device
Configuration screen.
You can also select multiple devices at once by
holding down the Shift key or Ctrl key while selecting.
2
Click (Delete).
A confirmation message appears.
3
Click [Yes].
The device is deleted.
Caution
• When a camera is deleted, "No Camera" is displayed in
the monitoring window in the layout. When you register
a camera in the default layout, the camera is assigned to
the first empty ("No Camera") monitoring window
available.
• If you delete a camera, you will no longer be able to find
data recorded with that camera. The recorded data is not
deleted at that time. The recorded data becomes target
for deletion at the point in time when the criteria for
deleting the recordings or overwriting the data in storage
are met. For details, refer "Configuring Settings Related
to Storage" (page 63).
Settings Required when Using SNC-
CS20/CM120/DS10/DM110/DS60/
1)
DM160
With the following six models
are restricted depending on the setting values of the
functions to be used. It is necessary to prioritize and select
the functions you want to use before you configure various
settings.
• SNC-CS20
• SNC-DS10
• SNC-DS60
Flow when Using SNC-CS20/CM120/DS10/
1)
DM110/DS60/DM160
When using any of the above cameras, first select the
combination of functions to use, and then configure
various settings. First, you must select a combination of
1)
of camera, other functions
• SNC-CM120
• SNC-DM110
• SNC-DM160
Registering Devices
35