Sony IPELA NSR-500 Series User Manual page 14

Date Time Format
Select the format for the date and time.
Enable NTP Server
Select the check box to enable the NTP server of NSR.
Caution
When the NTP server of NSR is enabled, enable
[Synchronize with NTP Server] as well, and configure
settings to obtain clock information from other NTP
servers. If you do not configure the settings, the clock may
deviate dramatically.
Synchronize with NTP Server
Select the check box to obtain the current time from
another NTP server.
IP Address
Enter the IP address of the NTP server from which to
obtain the information.
Current Synchronization
This displays the IP address of the NTP server from
which the current information is being obtained.
Time Zone
Select the region to configure the date and time.
Note
There is no setting for enabling or disabling daylight
saving time. If you select a time zone in which daylight
saving time is observed, the clock is adjusted
automatically for daylight saving time.
Setting Items of Network Device Menu
Screen
The network settings consist of "General Network" for
setting general settings, and "Network Device 1 to 2" for
setting LAN connectors.
Select the network you want to configure, and click [OK].
Caution
Connect the following devices to the LAN connectors.
LAN1: Network camera
14
Changing Initial Settings with the Setup Menu
1)
1)
LAN2: Network cameras
using a different segment from LAN1.)
1) Connect remote clients to the network specified with the [Network
Interface for Remote Client] setting (either LAN1 or LAN2) in the Server
Configuration screen. For details on the Server Configuration screen, see
"Configuring Settings Related to Servers" (page 18).
xSetting Items of General Network Screen
Configure each item, and click [OK].
Primary DNS
Enter the IP address for the primary DNS (Domain Name
Server).
Do not enter this if there is no primary DNS, or if it is not
required.
Secondary DNS
Enter the IP address for the secondary DNS. Do not enter
this if there is no secondary DNS, or if it is not required.
Default Gateway
Enter the IP address for the default gateway. Do not enter
this is if there is only a local network or there is no need to
connect to another network.
Hosts
If host name registration is necessary, enter a combination
of the IP address and host name, and click [Add] to add the
host to the list.
xSetting Items of Network Device 1 to 2
Configure each item, and click [OK].
Configure the settings as follows in accordance with your
environment.
(LAN2 can only be used when