Sony IPELA NSR-500 Series User Manual page 16

Setting Items of FTP Screen
Configure each of the items when you want to enable the
FTP server, and click [OK].
Enable user to Get Data from Remote
This function is used for service and maintenance.
Enable user to Get Tools from Remote
Select the check box to enable remote client downloading
of tools, operating manuals, and other documents using
FTP.
This is enabled under default settings.
User Name
This displays the user name. The user name is
"ftptool."
It cannot be changed.
Password
Enter the password. The default password is "ftptool."
Setting Items of Server Name Screen
Enter the server name of NSR, and click [OK].
Notes
• If you do not set a server name, a default name (e.g.,
NSR500_DB12) to which the last four digits of this
unit's LAN1 MAC address is appended is set.
• Do not use spaces when entering the server name.
16
Changing Initial Settings with the Setup Menu
Setting Items of SNMP Screen
Configure each item related to SNMP, and click [OK].
Enable
Select this to enable the SNMP agent function.
Disable
Select this to disable the SNMP agent function.
Community
Enter the SNMP community name.
Contact
Enter the contact.
Normally, enter the mail address of the system
administrator.
Location
Enter the installation location of NSR.
Name
Enter the name of the NSR unit.
Enable Trap
Select this to enable SNMP trap transmission.
Sink IP Address
Enter the destination IP address for SNMP traps.
Severity Level
Select the severity level for SNMP trap transmission.
An SNMP trap will be sent when severity levels meet or
exceed this setting.
For details on SNMP traps, contact your Sony dealer.