Features And Functions; Front (When The Front Cover And The Hdd Cover Are Opened) - Sony IPELA NSR-500 Series User Manual

Features and Functions

Front (When the Front Cover and the HDD Cover are Opened)

1 2
qf qd qs qa
A RAID LED
Lights green when the RAID configuration is
functioning properly.
Lights red if a fatal problem exists with the RAID due
to an internal HDD failure, for example.
Lights amber if the RAID is degraded or rebuilding.
B ACCESS LED
Blinks green when the HDDs are accessed.
C HDD LEDs (1 to 6)
Light green when the internal hard disk drives are
functioning properly.
Light red when failures or other problem occurs.
Also, light amber during the rebuilding of RAID.
D Lock
Use this in conjunction with the supplied HDD cover
key to lock the HDD cover.
When the HDD cover is locked, you cannot remove it.
The fan unit is also locked when the HDD cover is
locked.
When attaching the HDD cover, make sure the lock is
the unlocked state before you attach the cover.
You can distinguish the locked position from the
unlocked position by looking at the lock, as illustrated
below.
The HDD cover is
locked
E Fan unit
For details on maintenance, contact your Sony dealer.
8
Features and Functions
3 4
0 9 8 7
The HDD cover is
unlocked
5
F HDDs
For details on maintenance, contact your Sony dealer.
G NETWORK LEDs (1 and 2)
Light green when there is a link to the network.
Blink amber when the network is being accessed.
H
USB connectors (1 and 2)
Use these connectors to connect a USB mouse, USB
keyboard, USB flash memory device, USB CD/DVD
drive, or system controller (RM-NS1000) to the unit.
I REC LED
Lights red when recording images.
J STATUS LED
Indicates the recognition status of USB flash memory
devices.
If a device is recognized, this lights green.
If a device is not recognized, this lights red.
Caution
Do not remove the USB flash memory device while
the LED is blinking.
K FAN LED
Lights green when the internal fan is functioning
properly. Lights red when a fan failure occurs.
L SYSTEM LED
Blinks green while the unit is starting up and then
changes to always on when the unit has started.
During operation, this LED is lit green when the
system is functioning normally. When a system error
or other problem occurs, it lights red.
If this LED is lit red, contact your Sony dealer.
6