Panasonic EBL128 Planning Instructions page 107

Panasonic Electric Works Nordic AB
MEW01090 Rev: 3
Autogenerate...: The units connected to EBL128 (i.e. COM loop
units and "Display Units") will be identified by Win128 and an
installation with default settings will be auto generated in Win128.
The installation can then be edited, saved and the SSD can be
downloaded to EBL128.
SSD Verify...: The installation (SSD) shown in Win128 will be
compared with what is actually connected to EBL128.
differences will be listed.
Win128 settings...: Opens a dialog box for the required Win128
settings (e.g. com port, convention, etc.).
Download Software...:
EBL128 S/W file (xxx.bin) and/or a Text file (.sst) to an EBL128.
Edit Alarm Texts...: Opens the "Text editor" for the alarm texts to
be shown in EBL128.
Advanced Functions:
No "Level" selected (default) = Alarm algorithm parameters can not
be changed.
"Level 1" selected = Alarm algorithm parameters, except the fire
alarm parameters can be changed.
"Level 2" selected (a password is required) = Also the fire alarm
algorithm parameters can be changed. Convention and language will
be possible to change in "Win128 settings...".
120
The PC has to be connected but not logged on to EBL128.
105
EBL128 Planning Instructions V1.1.x
119
Opens a dialog box for download of a
Any
120