Alarm Devices (Sounders, Etc.); Door Release Magnets; Boxes - Panasonic EBL128 Planning Instructions

Panasonic Electric Works Nordic AB
MEW01090 Rev: 3
6.5.3
6.5.4
6.5.5
house" symbol instead of any text. 2217 can be connected to all
types of Panasonic detectors / bases. The input is polarised.
J1:1 (+5 to +24 V DC) / J1:2 (0 V). To be wall mounted with
the attached frame (84 x 84 mm) or flush mounted, e.g. with a
Swedish 65mm circular mounting box. 2217
2218, see below.
2218 Ext. LED (ext. indicator). Used when a detector is placed out
of view or hidden. The LED is lit at the same time as the LED
in the detector / base it is connected to. It has a "Burning
house" symbol instead of any text. 2218 can be connected to all
types of Panasonic detectors / bases. The input is polarised.
J2:1 (+5 to +35 V DC) for conventional detectors / bases
J2:2 (+; < 25 mA) for analog detectors / bases
J2:3 (0 V)
To be wall mounted (87 x 87 x 30 mm). 2218 has replaced
2217.

Alarm devices (sounders, etc.)

Regarding addressable alarm devices, see page 40.
In the Panasonic product range are no alarm device intended for a
supervised (monitored) voltage output (e.g. S0 or S1 in EBL128).
Connections of alarm devices according to drawing 128-22.
(For addressable sounders, see page 40.

Door release magnets

In the Panasonic product range is no Door release magnet. Door
release magnets shall always be provided with a "suppresion diode"
(e.g. 1N4004) in parallel with the coil, like in the alarm devices, see
drawing 128-22.

Boxes

3362 Waterproof box (IP66 / 67). A grey polycarbonate box with
ingress protection rating IP66 / 67. Four compression glands
are included for the cable entries. Dimensions (L x W x H):
175 x 125 x 75 mm. 3362 can be used for:
Addressable multipurpose I/O unit 3361
Addressable short circuit isolator 4370
Addressable 2 voltage outputs unit 3364
EBL128 Planning Instructions V1.1.x
52
is replaced with