C
C
ODE
ALLS
Answering
procedure
Code calling
and radio
paging
2-56
To answer a code call, follow these steps:
1
Press the flashing <CODE> key or the <ANS> key.
To access the zone paging system
2
Press the <ZPG> key or dial the zone paging access
code.
3
Dial the proper zone number.
4
Make your announcement.
Zone paging is described in more detail in
on page 2-65.
Code calling is sometimes used with radio paging systems
to signal voice or tone beepers. To use radio paging, press
the radio paging key or dial the radio paging access code.
Then dial the specific Beeper Identification Number
(BID). See
"Radio paging procedure"
S
S
400A U
ELEC
ET
"Paging"
on page 2-67.
HCXTD830, Rev. A01, July 2001
G
SER
UIDE