Creating A Three-Party Conference - Hitachi SelecSet 400A User Manual

C T
REATING A HREE

Creating a Three-party Conference

Procedure
1-40
- C
PARTY ONFERENCE
To create a three-party conference:
1
While connected to one party, dial a second party. The
first party is placed in consultation hold and an idle
CAP is automatically selected.
2
To cancel the call and return to the caller, press
<CNCL>.
3
To announce the conference, wait until the called
party answers and make your announcement. Press
<CONF> to connect all parties.
4
To connect all parties immediately, press <CONF> as
soon as the called party picks up. (Wait for the party
to pick up before pressing <CONF>. Pressing
<CONF> before the called party picks up is ignored.)
When the conference is formed, your display
indicates how many parties are in the conference.
5
To disconnect the last person added to the conference,
press <CNCL>.
6
To exit the conference without disconnecting the
other two parties, press <JOIN>. The conference is
still connected but out of your control.
7
To place the conference on hold, press <HOLD>.
A conference can only be held by pressing the
<HOLD> key.
8
To retrieve the held conference, press <START>, then
the winking CAP representing the held conference.
S S 400A U
ELEC ET
HCXTD830, Rev. A01, July 2001
G
SER UIDE