Hitachi SelecSet 400A User Manual page 57

M
ESSAGING
Turning on the
message
waiting lamp
while talking
to a covering
station
Turning a
message
waiting lamp
off
<CLME> key
1-46
To turn on the message waiting lamp while talking to a
covering station:
1
When you call a station that has calls covered to
another station (covering station) within your facility,
and the covering station answers, press the <CLME>
key.
2
Your <CLME> lamp lights and the called station's
message waiting lamp is lit, not the lamp of the
covering station to which you are currently connected.
Because you are not connected to the station whose
message waiting lamp you have activated, you do not
receive either confirmation tone or a confirmation
display.
To turn a message waiting lamp off, follow these steps:
1
When a user calls you because his message lamp is
flashing, your <CLME> key lamp lights.
2
Press your <CLME> key to extinguish the caller's
message waiting lamp.
The <CLME> key indicates message lamp status only
when someone calls you. If you call a station, the
<CLME> key does not indicate the status of the message
waiting lamp. To extinguish a message waiting lamp when
you are not connected to the station, dial the callme
cancellation code (usually ##0) then the station number.
S S 400A U
ELEC ET
HCXTD830, Rev. A01, July 2001
G
SER UIDE