Table A-3 Keys That You Can Program From Your Selecset 400A - Hitachi SelecSet 400A User Manual

P
ROGRAMMING YOUR
Keys that you
can program

Table A-3 Keys that you can program from your SelecSet 400A

Key Name
Autodial keys
ACCODE
(Account code)
Breakin (BRKN)
Call park (PARK)
Forward all calls (FAC)
Headset mode (HSET)
Intercom/priority (ICOM)
Last number redial (LNR)
Manual campon (CAMP)
Priority radio paging
(PRPG)
Radio paging (RPG)
Zone paging (ZPG)
Zone paging with park
(ZPG/P)
A-2
S S 400A
ELEC ET
See Table 3 for a description of keys that can be
programmed from your SelecSet 400A:
provide one-key access to dial-access codes, account
codes, and frequently called numbers.
Before making the call: dial the account code feature
access code, (ACFAC) the account code (AC) (or press
a key on which an account code has been programmed),
then the phone number.
During the call: press a key programmed with the
ACFAC and the AC. Your call is not interrupted. If you
do not have a pre-programmed key, ask the party to
hold. Press <TRANSFR>, dial the ACFAC + the AC,
and wait for confirmation tone. Press the flashing CAP
to resume your call.
breaks into a busy station, even if you are in a private
network and that station is at another location within the
network.
parks a call
forward all calls to your phone
activates headset mode by pressing a key
announces and originates a priority call
redials the last number dialed
activates camp-on to a busy station that does not have
call waiting assigned
initiates priority radio paging
initiates radio paging
accesses zone paging equipment
accesses zone paging equipment and allows you
to park a call
S S 400A U
ELEC ET
Purpose
HCXTD830, Rev. A01, July 2001
G
SER UIDE