Programming Instructions - Hitachi SelecSet 400A User Manual

A
PPENDIX

Programming Instructions

About
emergency
numbers
Determining if
a key is
programmed
Programming
an autodial
number
HCXTD830, Rev. A01, July 2001
If you program an emergency number into an autodial key,
make sure the key is programmed correctly by making a
test call. When the called party answers, briefly explain
the reason for the call before hanging up.
If you are not sure whether a key is programmed, press
<DSPL> and the programmable key. If the key is
programmed, the bottom line of your display shows the
feature or autodial number assigned to the key. If it is not,
you see the word autodial displayed. Press <DSPL> plus
any soft key to return to the normal display.
To assign autodial numbers or features to a key:
1
Press <START>.
2
Dial the station speed calling registration code
(usually #7).
3
Press the key that you want to program.
4
Dial the desired station or outside number. Include the
trunk access code (usually 9) if programming an
outside number. (Remember that autodial keys can be
used to store account codes and dial access codes.)
5
You receive confirmation tone (three short beeps)
when the number is programmed.
P
ROGRAMMING
I
NSTRUCTIONS
A-3