Hitachi SelecSet 400A User Manual page 24

C 1: A
HAPTER BOUT
Table 1-1 Suggested programmable keys(continued)
Key Name
<LTA/VER>
<OVR>
<SFPK>
<TONE>
Optional
programmable
keys
HCXTD830, Rev. A01, July 2001
Y S S 400A
OUR ELEC ET
The lamp associated with the long trunk alarm/verification
key flashes when a trunk has been connected for an
unusually long time. Also allows you to check a specific
trunk.
Press <OVR> to break into a busy station or a busy trunk.
All parties hear breakin tone, and a three-way conference
is established. Also breaks into a station with
do-not-disturb activated. This button can also be used for
the switchhook flash to a trunk feature to access central
office trunks and related features.
Use <SFPK> to place up to 10 calls on hold, using a single
key. Calls held at this key are answered in first-in/first-out
order (FIFO) and do not occupy a call appearance (CAP)
key.
This key cancels automatic hold, allowing you to operate
equipment controlled by touch tones.
These keys can be used for autodial keys (one-key access
to dial-access codes, account codes, and frequently called
numbers), or for optional features. Some optional
programmable keys are programmed from your SelecSet.
Others must be programmed from the Customer
Maintenance/Administration (CMAT) terminal.
A list of keys that are programmable from the SelecSet,
along with instructions for programming them, is included
in Programming your SelecSet 400A
Table 1-2 on page 1-14 for possible uses for optional
programmable keys.
P
ROGRAMMABLE
Function
on page A-1. See
K
EYS
1-13