Hitachi SelecSet 400A User Manual page 35

C
ALLING
Placing an
outside call for
an idle station
Placing calls
for stations
and type of
station
.
1-24
To place an outside call to an idle station:
1
Press <START>.
2
Dial the trunk access code (usually 9) and then the
number.
3
Press <CONF>.
4
Dial the station number.
5
When the station user answers, inform him or her that
the outside call is ringing.
6
Press <JOIN>
Each station within the facility is assigned a type of station
value. The TOS value determines a station's calling
privileges. For example, some stations may be permitted
to make local and long-distance calls, while others may be
restricted to local calls only.
When a station user calls and asks you to dial an outside
number, check the TOS value to make sure the connection
is permitted. Your administrator should furnish a list of
connections allowed for each TOS.
S S 400A U
ELEC ET
HCXTD830, Rev. A01, July 2001
G
SER UIDE