Table 1-4 Cap Keys And Related Functions - Hitachi SelecSet 400A User Manual

F K
IXED EYS
CAP keys
Fixed Keys
CAPs
CAP 1
CAP 2
CAP 3
CAP 4
If you press a CAP before placing an active call on hold, the call disconnects
CAP
availability
1-20
See Table 1-4
related functions.

Table 1-4 CAP keys and related functions

Call appearance keys (CAPs), are virtual lines used to
receive/place and hold calls while call control operations
such as hold, join, conference are performed. When
performing call handling operations (answering, placing
a call, etc.), the lowest-numbered CAP is automatically
selected.
If you make/receive only one call, always use CAP 1.
If a second call rings at your station, or to make a second
call, press <HOLD> and press CAP 2 to answer or dial a
second call.
Repeat the procedures for CAP 2 to handle a third call.
This CAP is reserved for holding calls and for receiving
special calls, e.g. priority calls.
At least two CAPs must be available before a call can be
answered. This ensures that one CAP can be used to
answer a call, while another can be used to place a call.
for an explanation of CAP keys and their
Function/Operation
HCXTD830, Rev. A01, July 2001
S S 400A U
ELEC ET
G
SER UIDE