Husqvarna Rider 15V2 Workshop Manual page 28

For Husqvarna Parts Call 606-678-9623 or 606-561-4983
7
Securely fasten the protective plate over the
silencer, two screws on each side of the silencer.
8
Press the fuel line securely against the fuel pump
and fit its hose clamp.
9
Screw tight the cable between the starter motor and
starter relay.
Attach the engine's electrical connections.
www.mymowerparts.com
10
IMPORTANT INFORMATION
Brace the screws for the battery cables to
avoid exposing the terminals to stress.
Lift the battery into place and fasten the cable
connections and safety guard. Tighten the catching
belt.
Reparation instructions
27
English –