Replacing The Light Bulbs - Husqvarna Rider 15V2 Workshop Manual

For Husqvarna Parts Call 606-678-9623 or 606-561-4983
Electrical system

Replacing the light bulbs

Rider Pro 18
For information about the bulb type, see 'Technical
Data'.
1. Unscrew the two screws holding the cover on
the power steering housing.
Lift up the cover and turn it around the steering
shaft.
2. Unscrew the two screws holding the lamp
insert.
Lift out the lamp insert.
3. Disconnect the cables from the bulbs
4. Lift out the bulbs from the insert.
5. Insert the new bulbs. Make sure you use your
thumb to support the front.
6. Refit the cables, lamp insert and the cover on
the power steering housing.
66
– English
www.mymowerparts.com