Fujitsu ETERNUS DX200 S3 Configuration Manual page 106

Chapter 6 Monitoring Settings
6.2 Various Notification Settings
(2)
In the user list of the [Setup SNMP Agent User] screen, click the [Add] button.
(3)
Enter the user name, set the required items, and click the [OK] button.
The screen display returns to the user list of the [Setup SNMP Agent User] screen.
(4)
Check the user that was set in
A confirmation screen appears.
(5)
Click the [OK] button.
The SNMP user settings are applied.
(6)
Check the setting completion message and click the [Done] button.
The screen display returns to the [Network] screen.
5
Trap setup
Set up the destination for sending the SNMP Trap.
This step is not required when ETERNUS SF Storage Cruiser is used to monitor the ETERNUS DX Disk
storage system.
(1)
In [Action], click [Setup SNMP Trap].
The [Setup SNMP Agent Trap] screen appears.
(2)
In the trap list of the [Setup SNMP Agent Trap] screen, click the [Add] button.
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
Step (3) is added in the user list and click the [Set] button.
106
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0