Chapter 3
Checking the Configuration Environment
This manual explains how to configure the system with the ETERNUS DX Disk storage system, taking a basic
configuration as an example.
3.1
System Configuration Example
This section describes the procedure for the following system configuration as an example.
iSCSI interface connection
•
Multipath connection using the ETERNUS Multipath Driver
•
Event notification (SNMP trap transmission, email notification, syslog notification, and remote support) via
•
LAN
Generation management of data by acquisition of backup based on the day of the week with generation
•
copy using SnapOPC+
■
Configuration Diagram
The following diagram shows a system configuration example.
Figure 3.1 System Configuration Example
Server
SNMP manager
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
Multipath
iSCSI SAN
LAN for Operation Management
Mail server
Syslog server
44
Copyright 2014 FUJITSU LIMITED
ETERNUS DX
Disk storage system
Remote support center
PC for Operation
Management/
PC for setup
P3AM-7652-02ENZ0