Fujitsu ETERNUS DX200 S3 Configuration Manual page 90

Chapter 5 General Settings
5.7 RAID Configuration Settings
4
Set the required items and click the [Create] button.
The following screen shows the settings that are displayed when creating a RAID group with the RAID
group name "RG0" and the RAID level "RAID5(4+1)".
A confirmation screen appears.
5
Click the [OK] button.
The RAID group is registered and the registration completion screen appears.
6
Click the [Done] button.
The screen display returns to the [RAID Group] screen.
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
90
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0