Entering Setpoints - HP 5890 Series II Plus Reference Manual

Keyboard and Displays

Entering setpoints

Examples of possible displays are provided where appropriate throughout
the manual.
If a particular function is not installed in your instrument, an
appropriate message is displayed when the key corresponding to the
function is pressed. For example, if no heated zone controlled by
DET B TEMP
Figure 2-3
Typical Display, a Function NOT Installed in the Instrument
Entering setpoints
To enter a setpoint value for a particular instrument function, the
function is first displayed by pressing the appropriate key(s).
Once the chosen HP 5890 function is displayed, a new setpoint value can
be entered at any time by pressing appropriate keys
.
,
is pressed to terminate the entry. Figure 2•4summarizes the two steps
involved.
34
is installed, pressing
DET B NOT
, or possibly
A
-
DET B TEMP
ACTUAL SETPOINT
INSTALLED
, , , or . For a numeric value,
B ON OFF
gives the display:
through
0
,
9
ENTER