Snmpv3 Target Address Table Configuration - HP 10GB ETHERNET BL-C SWITCH BMD00022 Command Reference Manual

Table 91
SNMPv3 Community Table Configuration Menu options
Command
tag <1-255 characters>
del
cur

SNMPv3 Target Address Table configuration

Command: /cfg/sys/ssnmp/snmpv3/taddr
[SNMPv3 snmpTargetAddrTable 1
This menu allows you to set passwords and display current user statistics. Passwords can be a
maximum of 15 characters. To disable a user, set the password to null by simply pressing the Enter
key when prompted for the password.
The following table describes the SNMPv3 Target Address Table Configuration Menu options.
Table 92
SNMPv3 Target Address Table Configuration Menu options
Command
name <1-32 characters>
addr <transport address ip>
port <transport address port
(1-65535)>
taglist <1-255 characters>
pname <1-32 characters>
del
cur
Description
Configures a tag of up to 255 characters maximum. This tag specifies a set of
transport endpoints to which a command responder application sends an
SNMP trap.
Deletes the community table entry.
Displays the community table configuration.
name - Set target address name
addr - Set target transport address IP
port - Set target transport address port
taglist - Set tag list
pname - Set targetParams name
del - Delete targetAddrTable entry
cur - Display current targetAddrTable configuration
Menu]
Description
Configures the locally arbitrary, but unique identifier, target address
name associated with this entry.
Configures a transport address IP that can be used in the generation
of SNMP traps.
Configures a transport address port that can be used in the
generation of SNMP traps.
Configures a list of tags (up to 255 characters maximum) that are
used to select target addresses for a particular operation.
Defines the name as defined in
/cfg/sys/ssnmp/snmpv3/tparam/name.
Deletes the Target Address Table entry.
Displays the current Target Address Table configuration.
Configuration Menu 125