Acl Tcp/Udp Filter Configuration - HP 10GB ETHERNET BL-C SWITCH BMD00022 Command Reference Manual

ACL TCP/UDP Filter configuration

Command: /cfg/acl/acl <1-384>/tcpudp
[Filtering TCP/UDP Menu]
This menu allows you to define TCP/UDP matching criteria for an ACL. The following table describes
the TCP/UDP Filter Configuration Menu options.
Table 174
TCP/UDP Filter Configuration Menu options
Command
sport <1-65535> <port mask>
dport <1-65535>
flags <value (0x0-0x3f)>
reset
cur
sport - Set to filter on TCP/UDP source port
dport - Set to filter on TCP/UDP destination port
flags - Set to filter TCP/UDP flags
reset - Reset all fields
cur - Display current parameters
Description
Defines a source port for the ACL. If defined, traffic with the specified
TCP or UDP source port will match this ACL. Specify the port number.
Some of the well-known ports include:
•
Number—Name
•
20—ftp-data
•
21—ftp
•
22—ssh
•
23—telnet
•
25—smtp
•
37—time
•
42—name
•
43—whois
•
53—domain
•
69—tftp
•
70—gopher
•
79—finger
•
80—http
Defines a destination port for the ACL. If defined, traffic with the
specified TCP or UDP destination port will match this ACL. Specify the
port number, just as with sport above.
Defines a TCP/UDP flag for the ACL.
Resets the TCP/UDP parameters for the ACL to their default values.
Displays the current TCP/UDP Filtering parameters.
Configuration Menu 194