Igmpv3 Snooping Configuration - HP 10GB ETHERNET BL-C SWITCH BMD00022 Command Reference Manual

IGMPv3 Snooping configuration

Command: /cfg/l3/igmp/snoop/igmpv3
[IGMP V3 Snoop Menu]
The following table describes the IGMPv3 Snooping Configuration Menu options.
Table 152
IGMPv3 Snooping Menu options
Command
sources <1-64>
v1v2 enable|disable
exclude enable|disable
ena
dis
cur
sources - Set the number of sources to snoop in group record
v1v2 - Enable/disable snooping IGMPv1/v2 reports
exclude - Enable/disable snooping EXCLUDE mode reports
ena - Enable IGMPv3 Snooping
dis - Disable IGMPv3 Snooping
cur - Display current IGMP Snooping V3 configuration
Description
Configures the maximum number of IGMP multicast sources to
snoop from within the group record. Use this command to limit the
number of IGMP sources to provide more refined control.
Enables or disables snooping on IGMP version 1 and version 2
reports. When disabled, the switch drops IGMPv1 and IGMPv2
reports. The default value is enabled.
Enables or disables snooping on IGMPv3 Exclude Reports. When
disabled, the switch ignores Exclude Reports. The default value is
enabled.
Enables IGMP version 3. The default value is disabled.
Disables IGMP version 3.
Displays the current IGMP version 3 parameters.
Configuration Menu 177