Information Menu; Introduction; Menu Overview - HP 10GB ETHERNET BL-C SWITCH BMD00022 Command Reference Manual

Information Menu

Introduction

You can view configuration information for the switch in the user, operator, and administrator
command modes. This chapter discusses how to use the CLI to display switch information.

Menu overview

Command: /info
[Information Menu]
The following table describes the Information Menu options.
Table 6
Information Menu options
Command
sys
l2
l3
qos
acl
rmon
link
sys - System Information Menu
l2 - Layer 2 Information Menu
l3 - Layer 3 Information Menu
qos - QoS Menu
acl - Show ACL information
rmon - Show RMON information
link - Show link status
port - Show port information
transcvr - Show Port Transceiver status
ufd - Show Uplink Failure Detection information
sfd - Show Server Link Failure Detection information
dump - Dump all information
Usage
Displays system information.
Displays the Layer 2 Information Menu.
Displays the Layer 3 Information Menu.
Displays the Quality of Service (QoS) Information Menu.
Displays the Access Control List Information Menu.
Displays the Remote Monitoring Information Menu.
Displays configuration information about each port, including:
•
Port number
•
Port speed
•
Duplex mode (half, full, or any)
•
Flow control for transmit and receive (no, yes, or any)
•
Link status (up or down)
Information Menu 24