Snmpv3 Target Parameters Table Configuration - HP 10GB ETHERNET BL-C SWITCH BMD00022 Command Reference Manual

SNMPv3 Target Parameters Table configuration

Command: /cfg/sys/ssnmp/snmpv3/tparam
[SNMPv3 snmpTargetParamsTable 1
You can configure the target parameters entry and store it in the target parameters table in the SNMP
engine. This table contains parameters that are used to generate a message. The parameters include
the message processing model (for example: SNMPv3, SNMPv2c, SNMPv1), the security model (for
example: USM), the security name, and the security level (noAuthnoPriv, authNoPriv, or
authPriv).
The following table describes the SNMPv3 Target Parameters Table Configuration Menu options.
Table 93
SNMPv3 Target Parameters Table Configuration Menu options
Command
name <1-32 characters>
mpmodel
snmpv1|snmpv2c|snmpv3
model usm|snmpv1|snmpv2
uname <1-32 characters>
level
noAuthNoPriv|authNoPriv|
authPriv
del
cur
name - Set targetParams name
mpmodel - Set message processing model
model - Set security model
uname - Set USM user name
level - Set minimum level of security
del - Delete targetParamsTable entry
cur - Display current targetParamsTable configuration
Description
Configures the locally arbitrary, but unique identifier that is associated with
this entry.
Configures the message processing model that is used to generate SNMP
messages.
Selects the security model to be used when generating the SNMP
messages.
Defines the name that identifies the user in the USM table, on whose behalf
the SNMP messages are generated using this entry.
Selects the level of security to be used when generating the SNMP
messages using this entry. The level noAuthNoPriv means that the SNMP
message will be sent without authentication and without using a privacy
protocol. The level authNoPriv means that the SNMP message will be
sent with authentication but without using a privacy protocol. The
authPriv means that the SNMP message will be sent both with
authentication and using a privacy protocol.
Deletes the targetParamsTable entry.
Displays the current targetParamsTable configuration.
Menu]
Configuration Menu 126