HP 10GB ETHERNET BL-C SWITCH BMD00022 Command Reference Manual page 196

ACL Re-mark In-Profile configuration
Command: /cfg/acl/acl <1-384>/re-mark/inprof
[Re-marking - In Profile Menu]
Table 177
ACL Re-mark In-Profile Configuration Menu options
Command
up1p
updscp <0-63>
reset
cur
ACL Re-mark In-Profile Update User Priority configuration
Command: /cfg/acl/acl <1-384>/re-mark/inprof/up1p
[Update User Priority Menu]
Table 178
ACL Update User Priority Configuration Menu options
Command
value <0-7>
utosp enable|disable
reset
cur
up1p - Set Update User Priority Menu
updscp - Set the update DSCP
reset - Reset in profile settings
cur - Display current settings
Description
Displays the Re-Mark In-Profile Update User Priority Menu.
Sets the DiffServ Code Point (DSCP) of In-Profile packets to the selected
value.
Resets the update DSCP parameters to their default values.
Displays the current ACL re-mark in-profile parameters.
value - Set the update user priority
utosp - Enable/Disable use of TOS precedence
reset - Reset in profile up1p settings
cur - Display current settings
Description
Defines 802.1p value. The value is the priority bits information in the packet
structure.
Enable or disable mapping of TOS (Type of Service) priority to 802.1p priority
for In-Profile packets. When enabled, the TOS value is used to set the 802.1p
value.
Resets UP1P settings to their default values.
Displays the current ACL Update User Priority parameters.
Configuration Menu 196