Menu Basics; Introduction; Main Menu; Menu Summary - HP 10GB ETHERNET BL-C SWITCH BMD00022 Command Reference Manual

Hewlett-packard switch user manual
Table of Contents

Advertisement

Menu basics

Introduction

The AOS CLI is used for viewing switch information and statistics. In addition, the administrator can
use the CLI for performing all levels of switch configuration.
To make the CLI easy to use, the various commands have been logically grouped into a series of
menus and submenus. Each menu displays a list of commands and/or submenus that are available,
along with a summary of what each command will do. Below each menu is a prompt where you can
enter any command appropriate to the current menu.
This chapter describes the Main Menu commands, and provides a list of commands and shortcuts that
commonly are available from all the menus within the CLI.

Main Menu

The Main Menu displays after a successful connection and login. The following table shows the Main
Menu for the administrator login. Some features are not available under the user login.
[Main Menu]

Menu summary

The Main Menu displays the following submenus:
Information Menu
The Information Menu provides submenus for displaying information about the current status of
the switch: from basic system settings to VLANs, and more.
Statistics Menu
This menu provides submenus for displaying switch performance statistics. Included are port, IP,
ICMP, TCP, UDP, SNMP, routing, ARP, and DNS.
Configuration Menu
This menu is available only from an administrator login. It includes submenus for configuring
every aspect of the switch. Changes to configuration are not active until explicitly applied.
Changes can be saved to non-volatile memory (NVRAM).
Operations Command Menu
info
- Information Menu
stats
- Statistics Menu
cfg
- Configuration Menu
oper
- Operations Command Menu
boot
- Boot Options Menu
maint
- Maintenance Menu
diff
- Show pending config changes
apply
- Apply pending config changes [global command]
save
- Save updated config to FLASH [global command]
revert
- Revert pending or applied changes [global command]
exit
- Exit
[global command, always available]
[global command]
Menu basics 14

Advertisement

Table of Contents
loading

This manual is also suitable for:

10gb ethernet bl-c

Table of Contents