Show all FDB information
Command: /info/l2/fdb/dump
-----------------
00:02:01:00:00:00
00:02:01:00:00:01
00:02:01:00:00:02
00:02:01:00:00:03
00:02:01:00:00:04
00:02:01:00:00:05
00:02:01:00:00:06
00:02:01:00:00:07
00:02:01:00:00:08
00:02:01:00:00:09
00:02:01:00:00:0a
00:02:01:00:00:0b
00:02:01:00:00:0c
An address that is in the forwarding (FWD) state indicates that the switch has learned it. When in the
trunking (TRK) state, the Trnk field displays the trunk group number. If the state for the port is listed
as unknown (UNK), the MAC address has not yet been learned by the switch, but has only been seen
as a destination address. When an address is in the unknown state, no outbound port is indicated.
Clearing entries from the forwarding database
To delete a static MAC address from the forwarding database (FDB), see the "Static FDB
configuration" section in the "Configuration Menu" chapter. To clear the entire forwarding database
(FDB), see the "Forwarding Database options" section in the "Maintenance Menu" chapter.
Link Aggregation Control Protocol information
Command: /info/l2/lacp
[LACP Menu]
The following table describes the Link Aggregation Control Protocol Menu options.
Table 20
LACP information
Command
aggr
port
dump
MAC address
VLAN
----
300
300
300
300
300
300
300
300
300
300
300
300
300
aggr
- Show LACP aggregator information for the port
port
- Show LACP port information
dump
- Show all LACP ports information
Usage
Displays LACP aggregator information for the port.
Displays LACP information for the port.
Displays all LACP information parameters.
Port
Trnk
State
----
----
-----
1
TRK
20
FWD
20
FWD
20
FWD
20
FWD
20
FWD
20
FWD
20
FWD
20
FWD
20
FWD
20
FWD
20
FWD
20
FWD
Information Menu 38