Table of Contents
Advertisement
Table 4
Global commands
Command
Action
Saves the active configuration to backup, and saves the current configuration as active.
save
save n saves the current configuration as active, without saving the active configuration
to backup.
Removes changes that have been made, but not applied.
revert
revert apply removes all changes that have not been saved.
Exit or quit
Exits from the command line interface and logs out.
Verifies station-to-station connectivity across the network. The format is:
ping
ping <host name>|<IP address> [attempts (1-32)> [msec delay]]
•
•
•
•
Identifies the route used for station-to-station connectivity across the network. The format
traceroute
is:
traceroute <host name>|<IP address> [<max-hops> [ msec delay ]]
•
•
•
Displays the command path used to reach the current menu.
pwd
Sets the level of information displayed on the screen:
verbose n
•
•
•
•
This command is used to Telnet out of the switch. The format is:
telnet
telnet <hostname> | <IP address> [port] [-m|-mgt|-d|-data]
By default, the -m or -mgt option for the management port is used. To use data ports,
specify the -d or –data option.
Displays the history of the last ten commands.
history
Remembers the current location in the directory of menu commands.
pushd
Returns to the last pushd location.
popd
Displays users who are logged in.
who
[-m|-mgt|-d|-data]
IP address is the hostname or IP address of the device.
number of tries (optional) is the number of attempts (1-32).
msec delay (optional) is the number of milliseconds between attempts.
By default, the -m or -mgt option for the management port is used. To use data
ports, specify the -d or –data option.
IP address is the hostname or IP address of the target station.
max-hops (optional) is the maximum distance to trace (1-32 devices).
msec delay (optional) is the number of milliseconds to wait for the response.
0 = Quiet: Nothing displays except errors, not even prompts.
1 = Normal: Prompts and requested output are shown, but no menus.
2 = Verbose: Everything is shown. This is the default.
When used without a value, the current setting is displayed.
Menu basics 16
Advertisement
Table of Contents
