Brother DCP-8070D Service Manual page 101

Error
Problem
codes
Fax paper setting mismatch
(The setting paper becomes
7F
besides the A4/Letter/Legal/
Folio) (Not applicable)
Fax paper size is incorrect (The
paper is smaller 10mm than the
80
letter size (11inch) in Fax List/
Report)
Failure of discharge detection
(Printing becomes unable until the
drum is replaced with a new one.)
83 (Discharge detection becomes
unable until the drum counter
reaches the double of the drum
life.)
Paper jam
84
Tray 1 is not installed into the
85
machine
Tray 2 is not installed into the
86
machine
Paper jam inside the machine
88
Incorrect paper size in duplex
89
printing
Paper jam in Tray 1
8A
8B Paper jam in Tray 2
8C Paper jam in MP Tray
Paper jam near eject tray
8D
Specified paper size is not supported
99
for duplex printing (Duplex)
9F Paper empty
A1 Front cover opened
During scanning, 90 cm or longer
A2
of a document is detected
Document rear sensor is not
A3 turned on when feeding the
document
ADF cover opened
A4
Fax scanning error (Warning)
A5
(First time)
Fax scanning error (Error)
A6 (Second time)
Scanning color parameter file
A7 failure
Scanning color parameter
A8
matching error
Refer Error
to: codes
DMA transfer error
3-23 AD
Document scanner home
position sensor is not turned on.
3-23 AE
Document scanner home
position sensor is not turned off.
3-23 AF
Document scanner unit FFC
3-24 B0
detection error
Dark level offset data level error
3-24 B1
for scanning
Gain control data level error for
3-24 B2
scanning
A/D converter standard voltage
3-25 B7
failure; at High side
A/D converter standard voltage
3-25 B8
failure; at Low side
Scanning light adjustment error
3-26 B9
is detected
3-26 BB White level data error
3-26 BD Black level data error
ADF duplex scanning cannot be
3-27 BF implemented due to too long
document
New toner detection lever failure
3-27 C0
3-28 C7 Insufficient DIMM Memory
3-28 C8 Secure print data full
DIMM error
3-29 C9
Excess current to USB device
3-29 CA that is front side of the machine
Drum unit is not installed into the
3-29 CD
machine
Modem initialization failed
3-30 D1
Fuser error other than 58, 59,
3-30 DD 68, 69, 6A, 6B, 6C, 6D, 6E, 6F,
76, 78, DE and E2 are occurred
Central temperature of heat
3-30 DE roller detected the temperature
that was lower than 60°C)
Program error
3-30 E0
3-10
Refer
Problem
3-31
3-31
3-32
3-32
3-33
3-33
3-33
3-33
3-34
3-34
3-34
3-34
3-35
3-35
3-35
3-36
3-36
3-36
3-37
3-37
3-37
3-37
Confidential
to: