■ CIS model
Note:
• In the case of the
9.17.2 Battery
(1) Remove the Battery. (for the model supporting the Battery only)
(2) Disconnect the connector of the Battery from the Connector of the Battery harness.
(3) Disconnect the Connector of the Battery harness from the Main PCB.
Main PCB
3
• Never disassemble or recharge the battery.
• Never dispose of the battery in fire.
• There is a danger of explosion if the battery is incorrectly replaced.
• When replacing the battery, use the spare part authorized by Brother Industries.
• Batteries used should be disposed of in accordance with the local codes and
regulations.
CCD
model, refer to
"9.17.1
Battery
Fig. 5-201
Battery".
Battery harness
2
1
DANGER
WARNING
5-172
Main PCB
Confidential