Cis Model; Speaker Assy - Brother DCP-8070D Service Manual

■ CIS model

Note:
• In the case of the

9.13.2 Speaker ASSY

(1) Disconnect the Connector of the Speaker harness from the Main PCB.
Speaker harness
Main PCB
<Left side>
(2) Release the Hook of the Speaker hold spring, and remove the Speaker hold spring and
the Speaker unit from the Joint cover ASSY.
CCD model, refer to "9.13.1 Speaker
Fig. 5-190
Hook
2b
Fig. 5-191
ASSY".
Speaker hold spring
Speaker unit
2c Joint cover ASSY
2a
5-164
Main PCB
Confidential