Brother DCP-8070D Service Manual page 410

(2) Remove the Screw, pan (S/P washer) M3.5x6 SR, and remove the NCU FG harness
ASSY.
(3) Remove the two bind B M4x12 Taptite screws, and then remove the NCU unit.
Taptite, bind B M4x12
Screw, pan (S/P washer) M3.5X6 SR
NCU FG harness ASSY
(4) Remove the Screw pan (S/P washer) M3.5x6 screw, and then remove the NCU shield
cover.
(5) Disconnect the connector of the NCU harness.
Screw, pan (S/P washer) M3.5X6
NCU harness
NCU unit
<Back side>
Fig. 5-181
NCU shield cover
Fig. 5-182
5-157
Taptite, bind B M4x12
NCU shield plate
NCU PCB ASSY
Confidential