Brother DCP-8070D Service Manual page 626

<WSW50> (SDAA settings)
Selector No.
Percentage voltage for
interpreting the external
1
telephone as being hooked up
(based on the network's
2
standard voltage)
(Not used.)
DC mask curve table to be
applied when the line is
3
connected
(Not used.)
AC impedance to be applied
4 when the line is connected
(Not used.)
Current control to be applied
5
immediately after connection of
the line
6
(Not used.)
AC voltage threshold for
7
detection of ring
8
(Not used.)
<WSW51> (Function setting 17)
Selector No.
Output of communications error
1 report when transmission
verification report is disabled
CR motor torque variation
2
reduction control (Not used.)
Cordless handset microphone
3
volume
4
(Not used.)
5
Main unit microphone level and
I echo cancellation ON/OFF
function (Not used.)
7
Support between nearly empty
→ empty when main unit cover
8
opened after nearly empty
detected (Not used.)
Function
Function
App. 1-49
Setting and Specifications
Setting and Specifications
0: Enable 1: Disable
Confidential