Toner Led Pcb Unit Assy - Brother DCP-8070D Service Manual

9.39 Toner LED PCB Unit ASSY

(1) Remove the pan B M3x8 Taptite screw, and remove the Regist ground spring.
(2) Remove the Toner LED PCB unit ASSY from the Frame R.
Toner LED PCB unit ASSY
Taptite, pan B M3x8
Assembling Note:
• Hang the Hook of the Regist ground spring on the Pinch spring and hang the ring part of
the Regist ground spring on the Pin, and secure the end part and the Toner LED PCB
unit ASSY to the Frame R with the screw.
Toner LED PCB unit ASSY
Taptite, pan B M3x8
Frame R
Hook
Regist ground spring
Frame R
Fig. 5-258
Pin
Fig. 5-259
5-209
Pins
<Right side>
Hook
Pinch spring
Regist ground spring
Confidential