Switch Back Actuator / Switch Back Sensor (For The Models With The Dx Only) - Brother DCP-8070D Service Manual

9.8.33 Switch Back actuator / Switch Back Sensor (For the models with the DX only)

(1) Push down the Stopper, slide the Switch back actuator to the stopper side and pull up
the Actuator switch back to remove.
Lower main chute ASSY
(2) Release the Hooks of the Switch back sensor to remove the Switch back sensor from
the Lower main chute ASSY.
(3) Disconnect the Connector from the Switch back sensor.
Lower main chute ASSY
Switch back actuator
Fig. 5-91
Connector
Hook
Hook
Fig. 5-92
5-91
Stopper
Switch back sensor
Hook
Confidential