Hitachi BD-W3300 Operating Instructions And Owner's Manual page 41

How to install or remove the washing cap ([WASH] operations only)
1
Bend the washing cap, and insert it from
its top.
Washing cap
3
Gently pull the outer rim of the washing cap toward
you and fit it to the inner rim of the drum.
1
Hold the bottom of the washing cap as
illustrated, and pull it toward you.
 Do not use the washing cap. 
The dryer heat will melt the washing cap.
 Blankets that can be dried 
 Blankets with
(gentle hand wash) on their labels.
 Acrylic blankets, polyester blankets, etc. (180 cm (W) x 230 cm (L) or less in size,
less than 3 kg each in weight)
 Do not use the [WASH DRY] and [DRY] operations for items that are 3 kg or more. (Doing
so will damage the laundry.)
 Do not use the [WASH DRY] and [DRY] operations on comforters or electric blankets. 
 Do not put blankets in mesh laundry bags or wash electric blanket covers.
Doing so will result in excessive vibration and insufficient drying during the spin cycle.
 Do not wash blankets together with other types of laundry.
 Wash small blankets (100 cm x 140 cm or less) together with other single-size blankets. Washing a
single blanket alone may result in excessive vibration and insufficient drying during the spin cycle.
To install
To remove
For the [WASH DRY] and [DRY] operations
Items for [WASH DRY] and [DRY] operations
2
Bend and push in the bottom of the
washing cap as illustrated.
4
Check that the washing cap is completely inside the drum.
 Place you hands on the washing cap, and
check whether the drum moves smoothly.
2
When the bottom comes out, pull it out
toward you.
Less than 3 kg
41