Changing The Dehumidification Mode - Hitachi BD-W3300 Operating Instructions And Owner's Manual

Other Settings
 You can change the method of dehumidification used during drying operations. 
• Air-Cooling Mode: Expels moisture and warm air from the drain hose during drying operations.
• Water-Cooling Mode: Uses water for dehumidification during drying operations. (More water is consumed.)
Press
Hold the
Press
 This setting will be saved.
  Water-Cooling Mode is always used during the [SILENT] and [DEODORANT] programs.
70
(continued)

Changing the dehumidification mode

To change the default setting
to turn on the power.
button for at least 5 seconds.
to turn off the power.
The setting changes as follows each time the
button is held for 5 seconds (the beep length
indicates the setting).
Water-Cooling Mode
Air-Cooling Mode
(default setting)
Long beep sound
Short beep sound