Other Settings
Reducing uneven or over-dry drying results
The drying results for laundry will vary depending on the wash load size and type of laundry.
Before you start the operation, adjust the level of drying according to your situation.
Press
Press
Press
Press
The operation starts.
This setting will be saved.
To change the setting, perform the same operation.
Settings that can be changed via the [DELAY START] button
When you hold
for at least 3 seconds, settings will appear to the left of the
buttons.
The functions of these settings are as follows.
Example display:
66
(continued)
To change the default setting
to turn on the power.
or
to select the program.
to change the setting.
.
Turn the temperature sensor control on or off.
(0: Off)
Adjust the spin speed for the dry cycle of [WASH DRY] operations.
(0: High-Speed Mode)
Adjust the spin startup conditions.
(1: Standard Mode)
The settings in parentheses are the factory default settings.
Use when drying is uneven
Default setting
Use when laundry is over-dried
(resulting laundry may be
slightly moist)
,
, and